In photography and optics, the f-number or focal ratio of an optical system expresses the diameter of the entrance pupil in terms of the effective focal length of the lens. The term “stop” is sometimes confusing due to its multiple meanings. A stop can be a physical object: an opaque part of an optical system that blocks certain rays. The aperture stop is the aperture that limits the brightness of the image by restricting the input pupil size, while a field stop is a stop intended to cut out light that would be outside the desired field of view and might cause flare or other problems if not stopped.
In photography, stops are also a unit used to quantify ratios of light or exposure, with one stop meaning a factor of two, or one-half. The one-stop unit is also known as the EV (exposure value) unit. On a camera, the f-number is usually adjusted in discrete steps, known as f-stops. Each "stop" is marked with its corresponding f-number, and represents a halving of the light intensity from the previous stop. This corresponds to a decrease of the pupil and aperture diameters.
Modern lenses use a standard f-stop scale that corresponds to following sequence: f/1, f/1.4, f/2, f/2.8, f/4, f/5.6, f/8, f/11, f/16, f/22, f/32, f/45, f/64, f/90, f/128, etc. The values of the ratios are rounded off to these particular conventional numbers, to make them easy to remember and write down. The slash indicates division. For example, f/16 means that the pupil diameter is equal to the focal length divided by sixteen. So, if the camera has an 80mm lens, all the light that reaches the film passes through a circle that is 5mm (80mm/16) in diameter.